My fans ( 80 mgb ) both started squealing a few years back and
from trial and error, I ended up lubing the bushings with
a mix of bearing grease and graphite power and have not
had a problem for years.
Steve
At 06:28 PM 7/22/99 -0700, patrick bailey wrote:
>The fans are supposed to blow into the
>engine compt thru the radiator.If yours
>are blowing the wrong way it could be
>someone took them apart and put the
>motor housings back together 180 out.try
>taking one apart and rotate the housing
>180 degrees and see if it blows the
>right way,while you are at it lube the
>bushings and make sure the "c" clips are
>good mine started squealing once and it
>was only a "c" clip that had broken and
>allowed the armature to slide foward.
>Good luck Pat
>
|