If you have a moment for a quick schematic, that would be very much
appreciated indeed.
At 12:07 PM 11/1/99 -0500, James H. Nazarian wrote:
>Hello MG List,
>
>This "lights on" warning modification can be done "in about an hour" using a
>small dual relay or a pair of small single relays. You can buy either at
Radio
>Shack along with a 12 volt buzzer for a few bucks. If any one is interested I
>will sketch a simple schematic for it. You don't need an engineering
credential
>for this modification. A soldering iron, solder, wire cutter, wire
stripper, a
>few feet of wire, and electrical tape is about all you'll need.
>
|