[Top] [All Lists]

Re: Tech/mech Overdrive Question

To: "Phil Bates" <>
Subject: Re: Tech/mech Overdrive Question
From: "Dennis and Kathy Skog" <>
Date: Fri, 24 Dec 1999 12:19:00 -0800

>OK, I went out to the garage to take care of this.  Took off the nuts at
>brake plate, and did a little whacking with the dead-blow hammer, but it
>doesn't want to budge at all>

I separated the overdrive at the brake ring (must also remove the flange) .
That gave me access to the snap spring.
I didn't have to use a hammer, just an old dull screwdriver to slid the snap
spring off the end of the shaft.
Good luck,
Dennis Skog

<Prev in Thread] Current Thread [Next in Thread>