Interesting to note that it's on the LHS firewall of my 77MGB. That's the only
location that the new wiring hrness would have placed it. Could it be that its
location is bimodal due to its wish to be near the gauges that it serves?
Bud Krueger
Paul Hunt wrote:
> It's normally on the RHS firewall, attached with a screw. In an MGB, at
> least, the wire colours are green on the B terminal and a light-green/green
> on the I terminal. It should also be marked TOP and be mounted
> appropriately, and have a little threaded adjuster screw. In the same
> vicinity may be the turn signal flasher, which is normally held in a spring
> clip, and has green and light-green/brown wires on it.
>
> The web site below may help with faulting, select 'Spanners', 'Electrics'
> and 'Gauges'.
>
> PaulH.
> http://freespace.virgin.net/paul.hunt1/
> (or if that URL doesn't work try )
> (http://194.168.54.52/paul.hunt1 )
>
> ----- Original Message -----
> From: Rick Sinclair <RHSinclair@USWest.net>
> To: MG list <mgs@autox.team.net>
> Sent: Thursday, December 30, 1999 11:57 PM
> Subject: Instrument voltage stabilizer
>
> > Can someone please tell me where the stabilizer is, and what it looks
> > like? I've been having trouble with my dials, and a Moss tech tip said
> > to check it. TIA
> >
> > Rory <:-P
> >
|