There should be a clearance of 0.12in/0.30mm on manual cars.
----- Original Message -----
From: Evangelos G. Makris <xirias@hol.gr>
To: <mgs@autox.team.net>
Sent: Saturday, September 02, 2000 9:30 AM
Subject: Re: choke cable trouble
> Finally should the "beak" shaped metal of the throttle linkage touch the
choke
> linkage spindle when throttle is fully closed or the usual 0.30mm
clearance
> applies? That would place a little bit less stress on the choke linkage
> mechanism.
>
> Evangelos
> 73 BGT
>
>
|