Did I recall correctly, isn't the bolt used to hold the stock air filters on
the SU carbbies the correct size?
Bill Mills
----- Original Message -----
From: "Larry Hoy" <larryhoy@prodigy.net>
To: "Matthew Trebelhorn" <matttrebelhorn@netscape.net>; <mgs@autox.team.net>
Sent: Monday, March 19, 2001 12:52 PM
Subject: RE: Engine work question
> >If I want to change the cam, do I need to pull the oil pump and
distributor?
>
> No, just the distributor and the oil pump drive which is accessible from
the top end.
>
> To remove the oil pump drive use a 5/16" fine thread bolt. You'll need
about a 6" or 7" bolt, thread a nut and a lock nut up the
> bolt about 1/2".
///
/// mgs@autox.team.net mailing list
/// (If they are dupes, this trailer may also catch them.)
|