Spline grease = "copper grease".
Good experience and keeps the rust out.
Cheers,
Hans
-----Original Message-----
From: paul.hunt1@virgin.net [mailto:paul.hunt1@virgin.net]
Sent: Friday, April 20, 2001 10:28 AM
To: Eckersmg@aol.com; mgs@autox.team.net
Subject: Re: Spline Grease and Overdrive Lubrication
The o/d uses the same oil as the gearbox, is filled/levelled and drained at
the same points (but there is a drain plug on the earlier o/d but not the
later), and the grade should be the same as used in the engine for your
local climatic conditions e.g. GTX 20W/50 as you say. Gearbox only is 4.5
UK pints (2.56 litres, 5.6 US pints), with o/d is 5.33 UK pints (3.36
litres, 6 US pints).
PaulH.
----- Original Message -----
From: <Eckersmg@aol.com>
To: <mgs@autox.team.net>
Sent: Thursday, April 19, 2001 7:13 PM
Subject: Spline Grease and Overdrive Lubrication
> Overdrive Lubrication
> After checking the archives for overdrive information, I could not find
much
> on the following:
> 1) The preferred lubricant for the overdrive (the same as the
transmission,
> Castrol GTX 20W-50?)
> 2) the additional volume required by the overdrive unit, or
> 3) more importantly the location of the fill hole (which is not diagrammed
in
> my 1974 Haynes manual).
///
/// mgs@autox.team.net mailing list
/// (If they are dupes, this trailer may also catch them.)
|