Bad news-it's not threaded. Good news is that if you can get the
points of your circlip pliars in the hollow of the damper you can pull it
out. Also, a flat screwdriver that is just wide enough to wedge in the
brass damper will allow you to gently lift it out.
On Mon, 10 Sep 2001 10:34:46 EDT Eckersmg@aol.com writes:
> I was trying to check/add oil to the steering rack on my 69 GT and
> ran into
> the problem of removing the the damper yoke.
/// firstname.lastname@example.org mailing list
/// (If they are dupes, this trailer may also catch them.)