RE; Pinion gear

["Maynard Hirsch" <mghirsch@netzero.net>]

If you haven't done the job yet, there is another way that may be easier than
I told you before.

1.  disconnect the pinion from the u-joint.
2..Disconnect the two tie rod ends
3.  Remove the rack (4 bolts) dont loose the shims, and pull through the
mount.

Maynard Hirsch

///
///  mgs@autox.team.net mailing list
///  or try http://www.team.net/cgi-bin/majorcool
///