Frank,
That sounds like the wire from the externally mounted condenser.
The wire goes to the positive terminal of the coil and it is
grounded through the case and clamp. It is only a one wire
type device. I'll go look at mine now to make sure.
Gene Balinski
80 B
At 04:52 PM 3/1/02 -0500, frank krajewski wrote:
>Any of you out there with a late model B that has the CEI ignition with
>the external amplifier? I need one of you to take a peek under your
>bonnet for me. In reinstalling my newly rebuilt motor I inadvertently
>knocked a wire loose and I'll be damned if I can find where it attaches.
>I have checked the wiring diagram and the Moss catalogue to no avail. It
>has a black wire coming out of what appears to be a diode or resistor of
>some type. It is attached via a clamp under the coil and on top of the
>amplifier fitted to later model Bs. It actually is squeezed in place
>with the coil clamp. The other end has a female electrical fitting and
>the wire reaches perfectly to the + side of the coil altho the wiring
>diagram does not show any black wires attached to the coil. My car is
>dead stock so any of you with stock ignition systems should have the
>same part. Appreciate any help! Thanks.
>Frank "Swamp Yankee" Krajewski
///
/// mgs@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
///
|