Re: Refurbishing wire wheels

["Bill Meyer" <wcameyer@msn.com>]

Good plan, except for the truing.  In my experience, most of these old
wheels have been neglected for so long (probably since new) that any attempt
at truing breaks spokes.  If you wish, collect all the methods and try them
out on your worst wheel (#6!!).  If you find anything that works, please let
me know.

Bill Meyer

> 1. remove tires/tubes, all balancing weights.
> 2. remove old paint & rust
> 3. true
> 4. prime & paint
> 5. remount tires, balance on car.

///  or try http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive