mgs
[Top] [All Lists]

Re: a-arm bushings

To: "stevep" <stevep@driversroad.com>, "MG List" <mgs@autox.team.net>
Subject: Re: a-arm bushings
From: "Telewest \(PH\)" <paul.hunt1@blueyonder.co.uk>
Date: Mon, 23 Dec 2002 09:18:14 -0000
After the cleanup and washing-up liquid, use a vice in the following order:
a socket big enough for the o/d of the bush to fit inside.  The A-arm.  The
bush,  A socket small enough to press on the inner metal sleeve of the bush.
No idea whether it works on an A but it does on a B.

----- Original Message -----
From: "stevep" <stevep@driversroad.com>
To: "MG List" <mgs@autox.team.net>
Sent: Saturday, December 21, 2002 11:18 PM
Subject: a-arm bushings


> I've upgraded to the heavier duty B gt bushings for my mga but am having a
> rather difficult time installing them into the a-arms.  it says in the
moss
> catalog that installation instructions included but for the life of I
don't
> have them.  What would these instruction have told me I needed to know
> before i started this job?

///  or try http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>