'Tis indeed. The half-shafts should only be used with the appropriate
casing, there is nothing to be gained by using the 'other' half-shaft and
everything to be lost. The diff and hubs can be interchanged, subject to
the previously mentioned overall width issue.
----- Original Message -----
From: "Bullwinkle" <yd3@nvc.net>
To: <BarrMark262@aol.com>; "mgs" <mgs@autox.team.net>
Sent: Wednesday, April 09, 2003 6:34 AM
Subject: Re: From disc to wire wheels-shim question
> I have no idea if the following is true of all MGBs, but it should be
> for the early "banjo" MGB as it used basically the same setup as the
> MGA.
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|