mgs
[Top] [All Lists]

RE: Socket for late MGB rear hub nut

To: "MG List" <mgs@autox.team.net>
Subject: RE: Socket for late MGB rear hub nut
From: "Gordie's Garage" <mg_garage@ameritech.net>
Date: Tue, 6 May 2003 05:24:41 -0400
IIRC, I used a 34mm hub socket purchased at a local auto parts.  Took a
couple of trips to get the right one.
Yup, I used a couple of cold chisels as wedges, alternating blows with
hammer till the hub popped off.

Safety Fast!
Gordie Bird
62 MGA
80 MGB



>
>
> The Snap-On 1-5/16" fits just fine. There are a few other brands that also
> fit, but I can't remember them just now. Following Paul Hunt's
> lead, I have
> removed my axle shafts by placing steel wedges behind the hub and then
> wedging them off with a 3lb. hammer.

///  or try http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>