At 08:18 PM 5/11/03 -0600, Phil Bates wrote:
>.... - how thick is the clutch disc suposed to be?? ....
Nominally 5/16" when new. If you squeeze it a little to take up most of
the internal spring motion, then about .300" or possibly as little as .290"
thick when new. Nominal 1/4" thickness is about end service of life, while
.220" would generally be touching the rivet heads on both sides.
Barney Gaylord
1958 MGA with an attitude
http://MGAguru.com
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|