Removing is one - I used a saw to get the heater become lose from the
firewall 10 years ago.
Second is putting it back in and try to reconnect the air router cable at
the lower spot of the heater.
Terrible job!
Cheers,
Hans '71 BGT
----- Original Message -----
From: "Max Heim" <mvheim@studiolimage.com>
To: "MG List" <mgs@autox.team.net>
Sent: Saturday, September 06, 2003 1:00 AM
Subject: Re: Valve cover
> on 9/5/03 9:16 AM, jello@ida.net at jello@ida.net wrote:
>
> > If you don't want to leave a heater core in there unconnected, you could
> > put in a blanking plate (like an MGA without a heater), and take out the
> > heater.
>
> Obviously you've never tried removing the heater core in a B. I'd rather
> pull the engine than the heater core.
>
>
> --
>
> Max Heim
> '66 MGB GHN3L76149
> If you're near Mountain View, CA,
> it's the primer red one with chrome wires
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|