Re: Crankshaft pulley removal

[Charles & Peggy Robinson <ccrobins@ktc.com>]

  There's a big thin washer under the bolt that is keyed to the shaft. 
Part of it is bent over against a flat on the bolt head as a locking 
device.  You need to get a chisel under this and bend it up away from 
the flat.  Then turn the bolt counter clockwise.

   Cheers,

    CR

James Harwood wrote:
> Thanks to all those on the list who expressed sympathy
> and condolences wrt my busted engine.
> 
> I am having a certain amount of trouble shifting the
> bolt that holds the crankshaft pulley on.