I see the washer, but it appears to be bent back into
a recess in the pulley rather than over the bolt.
So the bolt should come out, but doesn't seem to want
to move. Perhaps I should try applying some heat?
Thanks,
James
--- Charles & Peggy Robinson <ccrobins@ktc.com> wrote:
> There's a big thin washer under the bolt that is
> keyed to the shaft.
> Part of it is bent over against a flat on the bolt
> head as a locking
> device. You need to get a chisel under this and
> bend it up away from
> the flat. Then turn the bolt counter clockwise.
>
> Cheers,
>
> CR
|