I had a couple hours yesterday to work on the car. I checked the pins,
found no flaring at all. Testing the new bushes for fit on the pins
shows that two of the four bushes simply did not fit on the pin, on
either side. Sure seems to be a difference in the bushes.
--
Marc
Paul Hunt wrote:
>If 2 fit the pin and 2 don't then surely it has to be different bores in the
>bushes.
>
>PaulH.
>
>----- Original Message -----
>
>
>>I will check the pins with a micrometer to see if
>>perhaps the pin end is flared!
|