Marc:
Thanks for doing the checking. Sounds like it's time to pull all the
bushings from the shelf and check them again. Sigh.
It is very frustrating to keep on going over the same issues without
getting a permanent resolution.
Kelvin Dodd
> -----Original Message-----
> From: Marc Siegel [mailto:smarc@abs.net]
> Sent: Wednesday, June 22, 2005 7:13 AM
> To: Paul Hunt
> Cc: Dodd, Kelvin; mgs@autox.team.net
> Subject: Re: v8 bushes vs fulcrum pin fit?
>
> I had a couple hours yesterday to work on the car. I checked the pins,
> found no flaring at all. Testing the new bushes for fit on the pins
> shows that two of the four bushes simply did not fit on the pin, on
> either side. Sure seems to be a difference in the bushes.
>
> --
> Marc
>
> Paul Hunt wrote:
>
> >If 2 fit the pin and 2 don't then surely it has to be different bores
in
> the
> >bushes.
> >
> >PaulH.
> >
> >----- Original Message -----
> >
> >
> >>I will check the pins with a micrometer to see if
> >>perhaps the pin end is flared!
|