Roxter:
Let us know how you get on and also the part number of the pliers if you
find they work well.
I've got 3 or 4 cylinders around and am willing to revise my opinion on
rebuilding them if you get good results.
Kelvin Dodd
> -----Original Message-----
> From: mgs-bounces+doddk=mossmotors.com@autox.team.net [mailto:mgs-
> bounces+doddk=mossmotors.com@autox.team.net] On Behalf Of The Roxter
> Sent: Thursday, August 23, 2007 10:02 AM
> To: mgs@autox.team.net
> Subject: Re: [Mgs] Advice wanted on MGB Brake Master Cylinder
>
> Bob Howard wrote:
> > The washer-looking thing is a spacer made of a hard white plastic,
> > Delrin, I believe. Its fit is snug in the bore and I don't believe
you
> > can get it to come out by banging it on a board; I could not do it.
I
> > drilled it and screwed in a self tap screw, which I could then hook
and
> > pull on to remove the spacer.
> >
>
> Yes, I discovered that last night, did the same & it worked.
> > These MCs are difficult to work on, and I have not been able to
get
> > them to not leak. Unless you fancy the challenge of it all, you
might
> > want to buy a new one and be done with the hassle.
> I'm going to Sears today to buy the long-nosed circlip pliars. I will
be
> honing the bore before reassembling.
>
> -The Roxter
> --
_______________________________________________
Edit your replies
Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs
|