mgs
[Top] [All Lists]

Re: [Mgs] Changing brake fluid

To: "Richard Ewald" <richard.ewald@gmail.com>
Subject: Re: [Mgs] Changing brake fluid
From: "Oliver" <sumton@sbcglobal.net>
Date: Fri, 11 Jan 2008 16:12:24 -0600
with speedbleeders you can open all four orifices, pump the brakes, and watch
the old fluid go out.  then close them individually as you get clear fluid out
of each.  easy.  and they are like a couple bucks each.
  ----- Original Message -----
  From: Richard Ewald
  To: oliver
  Cc: mgs@autox.team.net
  Sent: Friday, January 11, 2008 3:05 PM
  Subject: Re: [Mgs] Changing brake fluid


  ::: Shrug:::
  If you use speedbleeders, and non-silicone fluid, you will want to have a
hose and bottle to catch the fluid so that you don't wind up stripping the
paint off of what the fluid hits.
  If you are using a hose and a bottle, all you have to do it have the hose
run upward a bit, and the fluid in the hose preforms the same function as the
speedbleeder.
  So what is the purpose of / need for the speedbleeders again?
  Rick


  On Jan 11, 2008 5:06 AM, oliver <sumton@sbcglobal.net> wrote:

    speedbleeders are absolutely the way to go!!!!!


    >I recommend investing in some speedbleeders.  They are one way valve
    > bleeders that make it very easy to bleed brakes with one person.  They
are
    > generally available in auto parts stores or on line from the
manufacturer.
    > I just used them to completely rebuild my MGB and I would never go back
to
    > the original bleeders.www.speedbleeder.com
    > Ron

    _______________________________________________
    Support Team.Net  http://www.team.net/donate.html


    You are subscribed as richard.ewald@gmail.com


    Mgs@autox.team.net
    http://autox.team.net/mailman/listinfo/mgs

    http://www.team.net/archive
_______________________________________________
Support Team.Net  http://www.team.net/donate.html




Mgs@autox.team.net
http://autox.team.net/mailman/listinfo/mgs

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>