Eh? You push the pedal to the floor, take your foot off, and the pedal only
returns slowly? I can understand a hose ballooning under pressure and so
giving insufficient clutch thrown to engage first/reverse without grinding,
but that sounds more to me like a partially seized pedal or master.
Or do you mean the pedal comes back normally but the clutch only slowly
engages? That could well be caused by the flex hose going 'one way' from a
flap of rubber internally, rather than collapsing.
PaulH.
----- Original Message -----
> My MGA needs the cluctch hose replaced. I am assuming this is the case as
> the
> clutch pedal goes to the floor and stays there then very slowly returns. I
> have diagnosed this as a collapsed hose to the slave cylinder ...
|