Re: squeak, pillar lubrication

[TrmpetDave@aol.com]

In a message dated 9/1/99 3:50:00 PM, nogera@prodigy.net writes:

<< The only way I have found to insure both
sides are getting oil o  is to  occasionally hold the oiler open until oil
drips out both sides. >>

If that doesn't work, you can disconnect the oil line that is open from the 
junction block on the left side of the firewall, and plug the hole with an 
appropriately threaded bolt (not easy to find). Then, when the one shot pedal 
is depressed, all the pressure will go to the plugged side.