morgans
[Top] [All Lists]

Re: Wheel bearings

To: <WEmery7451@aol.com>, <grand_wazoo@flinet.com>, <fot@autox.team.net>,
Subject: Re: Wheel bearings
From: "Greg Solow" <Gregmogdoc@surfnetusa.com>
Date: Thu, 11 May 2000 20:16:55 -0700
It is interesting to note that on many older Morgans with the light duty or
"normal" front stub axles, we often find the axles bent.  AND THEY BEND
DOWNWARD and not up as one might logically think.  So the cornering forces
tending to bend the axle under the car seem to be the greatest forces acting
on the spindles.  Many of these bend spindles don't pass Magnaflux
inspection.
                                                                    Regards,
Greg Solow
----- Original Message -----
From: <WEmery7451@aol.com>
To: <grand_wazoo@flinet.com>; <fot@Autox.Team.Net>
Sent: Tuesday, May 02, 2000 9:30 AM
Subject: Re: Wheel bearings


> In a message dated 5/2/00 3:57:52 AM Pacific Daylight Time,
> grand_wazoo@flinet.com writes:
>
> << I'm shocked that it was the right front as it is the left front that
takes
> most
>  of the racing load on nearly every track we race at. >>
>
> I believed that almost everything trashed involving front wheels happened
on
> the right front of my car -- broken spindle, broken hub, failed wheel
> bearings, and spotted tires.  My guess is that there is more damaging type
> stresses on the wheel located on the inside of most of the bends, rather
than
> on the outside.  On most old Triumphs, the inside wheel is probably
dribbling
> like a basket ball going around the corner.


<Prev in Thread] Current Thread [Next in Thread>
  • Re: Wheel bearings, Greg Solow <=