morgans
[Top] [All Lists]

RE: Tie Rod ends

To: "John T. Blair" <jblair1948@cox.net>, <morgans@autox.team.net>
Subject: RE: Tie Rod ends
From: "Dodd, Kelvin" <doddk@mossmotors.com>
Date: Wed, 25 Oct 2006 15:10:29 -0700
John:

John:

The male thread is 9/16" with a 16 tpi pitch.

The stud is 3/8" x 24

The overall length of the stud is approx. 1.25" with .63" of that being
threaded

The fat part of the taper is .515" and the narrowest part is approx.
.45+"




Hope this helps you out.

Kelvin Dodd
Ojai, CA













-----Original Message-----
From: owner-morgans@autox.team.net [mailto:owner-morgans@autox.team.net]
On Behalf Of John T. Blair
Sent: Saturday, October 21, 2006 8:58 AM
To: morgans@autox.team.net
Subject: Tie Rod ends

Any body have an old tie rod end for their Morgan laying around?  If so
could you measure it up for me.  I need the diameter and pitch of the
male end that screws into the tie rod, and the length, of the ball
stud, the diameter and pitch of the threaded end, and the lenght of
the smooth part, and the diameters at both ends so I can get the taper.

Why I'm looking for this, is to see if they are similar to the ones
used on the TR1800.  We've got the suspension out of Dad's 1800 to have
the steering box rebuilt, and we are also looking for tie rod ends.  

TIA

John


John T. Blair  WA4OHZ     email:  jblair1948@cox.net
Va. Beach, Va             (eBay id: zebra48-1)
Phone:  (757) 495-8229

          48 TR1800    48 #4 Midget    65 Morgan 4/4 Series V (B1106)
     75 Bricklin SV1 (#0887)    77 Spitfire    71 Saab Sonett III
                       65 Rambler Classic

Morgan:    www.team.net/www/morgan
Bricklin:  www.bricklin.org

If you can read this             - Thank a teacher!
If you are reading it in English - Thank a Vet!!


///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>