The 324 was Oldsmobile.
Dave Cunningham
-----Original Message-----
From: Kevin Lake <lakek@oit.edu>
To: MIKE BOTELER <FRVT83E@prodigy.com>; lajones@uswest.net
<lajones@uswest.net>; oletrucks@autox.team.net <oletrucks@autox.team.net>
Date: Monday, March 15, 1999 1:55 AM
Subject: Re: [oletrucks] GMC Parts
>Could it be the 324ci (I think it was a Buick based motor) that GMC used in
>some of the bigger trucks? It has a pretty distinctive look to it, the
>valve covers are pretty shallow, and they are almost flat-topped, and sit
>at almost a 45 degree angle. You can also check the serial number
>(probably located on the passenger side just above the edge of the oil
>pan), the first 3 numbers should be the displacement. Good luck.
>
>Kevin Lake
>56 GMC Suburban/napco
>
>----------
>> From: MIKE BOTELER <FRVT83E@prodigy.com>
>> To: lajones@uswest.net; oletrucks@autox.team.net
>> Subject: [oletrucks] GMC Parts
>> Date: Sunday, March 14, 1999 6:20 PM
>>
>> Larry, I was in a junk yard Sat. and saw a large V8 in a BIG TF GMC
>> short nose. I had a friend with me and we could not identify the
>> motor, it is complete from carb. down...no air cleaner. It is
>> located in Maryland about 1 hour from Wash. DC. I an going back this
>> week and with some help on what to look for maybe I could ID for you
>> and check price.
>>
>> I also found a complete '57? GMC 100 front clip...it has the raised
>> ribs on the hood and chrome GMC in the indent on the front. The rest
>> of the truck has been picked over, but still may hold a "find" or
>> two!
>>
>> Let me know!
>>
>> Mike B. '56 8400 Wrecker :)
>> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|