Okay it was a test you guys passed, I looked at the book I thought I read it in
I am wrong, sorry...know wonder it took so lon to bleed those brakes on the 51!
Chris Dillon
Passnb4U@aol.com wrote:
> In a message dated 4/5/99 1:25:44 PM Pacific Daylight Time,
> dillo021@tc.umn.edu writes:
>
> <<
> Did you bleed the master cyclinder? Most likely it air in the lines, try
> bleeding the shortest length of tue first (this is usually the drivers
> front wheel) then move to the 2nd longest and so on. Sometimes bleeding a
> fresh system will take a while be patient, also make sure all you new
> connections are tight. Good Luck. >>
>
> This is backwards, start at the point furthest from the master cylinder.
>
> Mike
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|