Mine had so much old grease on it I had to use an impact wrench to loosen &
back out the screws. But what Bruce outlines is right.
Regards,
Doug Pewterbaugh
dpewter@msn.com
Denton, TX
49 3104 216 5-window
----- Original Message -----
From: Bruce Michaels <hbn@ojai.net>
To: <oletrucks@autox.team.net>
Sent: Saturday, February 12, 2000 8:28 PM
Subject: Re: [oletrucks] Steering arm (drag link) Help!
> pull out the cotter pin. then back out the end cap "looks like a screw".
> then it should come right off the steering knuckle.
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|