oletrucks
[Top] [All Lists]

Re: [oletrucks] steering column

To: "New Mexico Jim" <ADvent@thuntek.net>
Subject: Re: [oletrucks] steering column
From: "Claude" <cramey@dashlink.com>
Date: Mon, 4 Sep 2000 17:50:09 -0500
I have the column out of my '59 and measured it. From the box where the
column is attached to end point of the shaft is 36". to the bottom of the
splines is 34 3/4". to the top of the splines is 35 1/4". The steering wheel
is 5 1/4" deep from the top of the wheel to the bottom of the splines.(as it
lays on the bench without the bottom cone). hope those measurements make
sense.
I have no idea if they will bolt up.........
Claude
1959 Apache Fleetside
http://www.dashlink.com/~rameyfam

----- Original Message -----
From: "New Mexico Jim" <ADvent@thuntek.net>
Cc: <oletrucks@autox.team.net>
Sent: Monday, September 04, 2000 4:37 PM
Subject: [oletrucks] steering column


>
>
> Will somebody who has a 57 to 59 truck measure th steering column from
> where the tube goes into the box and to end of the column? My 57 had a
> dished wheel, because the columns were shorter in that year that they were
> in 55 or 56. Those had a flat wheel. Will a steering box from a TF bolt up
> to the frame correctly on an AD?
>
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>

oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>