Re: [oletrucks] Mechanics Help Needed

[Advdesign1@aol.com]

> 
>  Question is, can I sandblast using #1 sand (very fine) the crank and the 
cam
>  and all the other parts that used to have a mirror shine to them?

I would keep all sand away from the engine and its components.   Sandbasting 
will change engine tolerances.
Talk to a macninist who might be able to hot tank away your carbon.  You need 
to clean oil passages very carefully and thoroughly to remove any trapped 
sand.
Bob ADler
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959