oletrucks
[Top] [All Lists]

Re: [oletrucks] Re: oletrucks-digest V2 #1140

To: "Dingus, Dave A. AS1 (USS WASP LHD-1)" <dingus@wasp.navy.mil>,
Subject: Re: [oletrucks] Re: oletrucks-digest V2 #1140
From: "Woods E. Houghton" <woodecindy@caverns.com>
Date: Sun, 12 Nov 2000 22:29:59 -0700
The make a zerk cleaner for about $5
-----Original Message-----
From: Dingus, Dave A. AS1 (USS WASP LHD-1) <dingus@wasp.navy.mil>
To: 'Pastorjon994@cs.com' <Pastorjon994@cs.com>; JGWolford@aol.com
<JGWolford@aol.com>; oletrucks@autox.team.net <oletrucks@autox.team.net>
Date: Sunday, November 12, 2000 9:44 AM
Subject: RE: [oletrucks] Re: oletrucks-digest V2 #1140


>If this is done be carefull not to over heat it and temper the spring,
under
>the ball bearing
>
>> -----Original Message-----
>> From: Pastorjon994@cs.com [SMTP:Pastorjon994@cs.com]
>> Sent: Sunday, November 12, 2000 9:43 AM
>> To: JGWolford@aol.com; oletrucks@autox.team.net
>> Subject: Re: [oletrucks] Re: oletrucks-digest V2 #1140
>>
>> Sometimes a propane torch on the end of a zerk will liquify any hardened
>> grease and make the zerk usable again.  Otherwise, zerks can be had at
>> your
>> FLAPS and are very inexpensive.
>>
>> Jon Callahan
>> '50 3100
>> Champaign/Urbana, Illinois
>> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>

oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>