Speking of oxygen sensors. Can I run a single oxygen sensor from one side
of a dual exhaust setup?
On Wed, 15 Aug 2001, Bruce Kettunen wrote:
> The blue silicone stuff that Locktite, NAPA and others sell works
> real well too, though if you are sloppy it sticks out like a sore
> thumb. At least we don't have to worry about fouling an oxygen sensor
> on our trucks.
>
> Since it conforms to both surfaces and can fill a pretty big gap,
> it is very forgiving.
>
> Make sure you follow the instructions to make it work right.
>
> Bruce Kettunen
> 57 3200
> Mt. Iron, MN
>
> At 15 August 2001, you wrote:
>
> >I'm sure this is a heresy that will stir the ire of several on the
> list
> >and I agree that the most important first item is to make sure that
> the
> >metal surfaces that the gasket mates to are as flat and clean as
> possible
> >and I also agree that the regular gasket sealer goo isn't much good,
> but
> >WHEN ALL ELSE FAILS. . .
> >
> >I drove Corvairs for almost 15 years (and still have my first one--66
> >Monza since July 1974 but it's restored and rarely driven now) and
> learned
> >how to deal with pesky oil leaks. I brushed a thin coat of aviation
> permatex
> >on both sides of the gasket and on the head and on the valve cover
> (oil
> >pan, etc. . .). I went years w/o any leaks. It works ok with cork,
> paper,
> >or rubber gaskets. It has a slight gluing effect, ie, it will hold
> pesky
> >gaskets in place so you can bolt things down, but not so much so that
> >you can't pry things loose with light effort. Done right, you shouldn't
>
> >even see it from the outside.
> >
> >I'm sure I'll get rebuked for this one, but I've used it for years
> sucessfully.
> >
> >Mark Noakes
> >58/56 Chevy Suburban
> >59 GMC Suburban
> >Knoxville, TN
> >
> >On Wed, 15 August 2001, MKlepp4335@cs.com wrote:
> >
> >>
> >
> >> Do all reproduction (chromed) valve covers leak? I have talked
> to several
> >
> >> people with varying degrees of leaks. I have a Chrome 216 cover
> on my 235
> >
> >> but am not happy with the fit. Does anyone have an original 216
> cover that
> >
> >> doesn't/didn't leak for sale? Let me know how much and where
> you are.
> >
> >> Thanks.
> >
> >>
> >
> >> Mike Klepp
> >
> >> '48 3100
> >
> >> Wichita Falls, TX
> >
> >> oletrucks is devoted to Chevy and GM trucks built between 1941
> and 1959
> >oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
> >
>
>
>
>
> ===================================================================
> EASY and FREE access to your email anywhere: http://Mailreader.com/
> ===================================================================
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
>
Thanks,
-JLS
I'm climbing for the American Lung Association
http://www.pledgepage.com/jls
Please sign the guest book
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|