You can also connect the transmission end into a drill and see if the
speedometer and cable are good....1000 rpm = 60 mph. Make sure it is
spinning the cable the correct way before going wide open with the
drill.....
Mike Boteler
'56 4400 Stake
'56 6400 Stake
'56 8400 Wrecker
'56 9200 Tractor w/Powermatic
'57 10500 Fire Truck
Hughesville, MD
----- Original Message -----
From: <Ribbit2@aol.com>
To: <Karen.Duff@ctbrad.ang.af.mil>
Cc: <oletrucks@autox.team.net>
Sent: Tuesday, May 13, 2003 3:32 PM
Subject: Re: [oletrucks] speedometer
> The easiest way is to unhook the cable at the speedometer and watch the
cable
> in the middle of the housing. It should turn faster as you go faster.
>
> Jim H
> 57-3100-SB
> oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959
|