oletrucks
[Top] [All Lists]

RE: [oletrucks] Spare Tire Rack

To: <TOUCANMAN@aol.com>, <oletrucks@autox.team.net>
Subject: RE: [oletrucks] Spare Tire Rack
From: "Jim Wilkerson" <Jim.Wilkerson@sas.com>
Date: Tue, 25 Nov 2003 10:25:01 -0500
Steve,

Thank you! Just so I'm sure that I understand, the flat brace mounts on the 
'inside' of the bed side or on the top of the bed side angle - horizontally to 
tie the two angle braces together. So, the flat brace is visible and the angle 
iron brace is not visible? 

Sincerely, Jim W.

-----Original Message-----
From: TOUCANMAN@aol.com [mailto:TOUCANMAN@aol.com] 
Sent: Monday, November 24, 2003 8:45 PM
To: Jim Wilkerson
Subject: Re: [oletrucks] Spare Tire Rack


Jim, the flat one on my 53 gmc goes inside the top of the bedside side to 
side like you say but i have an additional brace of angle iron that goes under 
the bed .3 bplts to the bedside and 3 bolts thru the bed wood using 2 bedstrip 
holes and the need to drill the third into the strip and wood, just to help 
support the weight of the weel.....steve
oletrucks is devoted to Chevy and GM trucks built between 1941 and 1959

<Prev in Thread] Current Thread [Next in Thread>