I've been using "zerorust".
I was able to pick it up at my automotive paint supply store.
I painted a horsetrailor frame with it, after just hand wire brushing it
off, about 2 years ago, styill holding up without issues.
I think it was 40 bucks for a gallon.
Mike
> [Original Message]
> From: Tom Cooper <c_tom@bellsouth.net>
> To: <oletrucks@autox.team.net>
> Date: 4/1/2006 6:09:00 AM
> Subject: [oletrucks] frame cleaning and rust
>
> I have removed the front and rear from my donor car.
> http://www.coopscorner.com/55truck/donor_car/donor_index.htm
>
> I was thinking about pressure washing, and wire brushing. Then I was going
> to use POR 15 or something equivalent. I can only find POR-15 online. Does
> anyone know of a product that will do the same as POR-15 that I can get
> locally? Can anyone tell me about how much POR-15 or an equivalent product
> is needed to do a frame, front and rear-end on a 55 TF? Are there any
parts
> that I should not coat with the product? I will have to brush it on
because
> I do not have a respirator or spray gun at this point in time. I hope that
> brushing is ok, the spray gun and respirator are on my got to get list.
> Any help/tips and pictures are always welcome.
> Thanks Tom
> 55 TF
> 97 S-10
|