oletrucks
[Top] [All Lists]

Re: [oletrucks] sloppy window splined shaft

To: "Alan and Linda" <alquin@telus.net>,<oletrucks@autox.team.net>
Subject: Re: [oletrucks] sloppy window splined shaft
From: wayne osborne <wayne@chevytrucks.org>
Date: Fri, 26 Jan 2007 13:38:10 -0500
Make that cut stips from a printing plate--   doh  wayne

At 01:22 PM 1/26/2007, wayne osborne wrote:
>I did the same to mine, working in the printing industry I cut a couple 
>small strips from plate formed it into a circle and working it in there. 
>Holding up fine so far and it did remove some but not all the 
>jiggling..  --wayne
>
>At 01:19 PM 1/26/2007, Alan and Linda wrote:
>Has any of you truck enthusiasts out there found a fix for loose(worn bushing
>or flange?) shaft that your window winder handle turns. I' going to try make a
>brass shim stock piece (flatstock around .020 thou.)





<Prev in Thread] Current Thread [Next in Thread>