shop-talk
[Top] [All Lists]

Re: [Shop-talk] Lamp question

To: <shop-talk@autox.team.net>
Subject: Re: [Shop-talk] Lamp question
From: "John T. Blair" <jblair1948@cox.net>
Date: Fri, 18 Jul 2008 09:08:30 -0400
At 09:11 PM 7/17/2008, Karl Vacek wrote:

>Lamps usually use a running pipe thread, like the 1/8" Iron Pipe 
>(that's what the IP stands for) that is most typical today.
>
>What you had sounds like it *might* be 1/4" pipe.  it has a major 
>diameter of 0.540 - just over 1/2", though its pitch is 18 TPI 
>rather than the 20 pitch you tried.
>
>There're also a (fairly rare) 3/8" pipe size that's occasionally 
>encountered in lamps or elsewhere - like old electrical stuff.  Also 18 TPI.
>
>An old hardware store or a good lamp repair shop should be able to 
>fix you up - or Google it...

>Karl,


Thanks for the info.  That's what I was looking for.

John


John T. Blair  WA4OHZ     email:  jblair1948@cox.net
Va. Beach, Va
Phone:  (757) 495-8229

           48 TR1800    48 #4 Midget    65 Morgan 4/4 Series V (B1106)
      75 Bricklin SV1 (#0887)    77 Spitfire    71 Saab Sonett III
                        65 Rambler Classic

Morgan:    www.team.net/www/morgan
Bricklin:  www.bricklin.org

If you can read this             - Thank a teacher!
If you are reading it in English - Thank a Vet!!
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


Shop-talk mailing list

http://autox.team.net/mailman/listinfo/shop-talk

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>