spridgets
[Top] [All Lists]

FW: PPG Deltron Paint

To: "'spridgets@autox.team.net'" <spridgets@Autox.Team.Net>
Subject: FW: PPG Deltron Paint
From: Bert Kleinschmidt <kleinschmidt@earthlink.net>
Date: Mon, 27 Oct 1997 00:41:17 -0800
Reply-to: Bert Kleinschmidt <kleinschmidt@earthlink.net>
Sender: owner-spridgets@Autox.Team.Net
Leo Speichinger wrote:
>
>Any time when taking metal down to bare finish as you do by blasting
>always use a two part epoxy etching primer and you will not have that
>problem. A good brand is Sherwin Williams E2-G980 etching filler. It has
>to be mixed 1 to 1 ratio with R7-K982 which is the activator. Once dry
>it is extremly hard to bead blast off as it attaches and seals to the
>micro ridges of the blasted metal. 
>
>If you have any questions 
>ldsp@flash.net
 
I am in the process of stripping most of a Sprite down to bare steel.
I had planned to etch the metal before priming (using a metal etch
product which contains phosphoric acid).  Will this serve the same
purpose, or will I still need a special primer?

Bert.


<Prev in Thread] Current Thread [Next in Thread>