spridgets
[Top] [All Lists]

Re: Help

To: "Frank Clarici" <spritenut@Exit109.com>, <spridgets@Autox.Team.Net>
Subject: Re: Help
From: "Larry and Sandi Miller" <millerls@msn.com>
Date: Sat, 3 Jan 1998 11:54:23 -0800
Reply-to: "Larry and Sandi Miller" <millerls@msn.com>
Sender: owner-spridgets@Autox.Team.Net
Been there, done that, what's next?

Larry Miller
-----Original Message-----
From: Frank Clarici <spritenut@Exit109.com>
To: spridgets@Autox.Team.Net <spridgets@Autox.Team.Net>
Date: Saturday, January 03, 1998 10:17 AM
Subject: Help


>Hi All
>I drove my 60 Sprite with 5 speed for the first time today. Any body want
to buy
>it!
>
>rebuilt 1275, leaks oil as fast as you can pour it in....If I hook up the
PCV, it
>burns yellow clouds of smoke so thick you can't see my yard.
>
>Datsun 5 speed, drive shaft knocks on trans tunnel, too long a space
between 2nd
>and 3rd.
>
>All new brakes which lock up all by themselves even without touching the
brake
>pedal!
>Silicone fluid probable cause.
>
>Recored radiator, only boils over at 160 degrees.
>
>New fuel pump only needs an occasional tap with a hammer.
>
>New Lucas ignition switch, car must still be hot wired to get ignition??
>
>Fresh paint, yellow with black rally stripe, rust only starting in some
places.
>
>Rebuilt SUs that need replacing with a real carb or other SUs.
>
>New exhaust but who can hear it over the drive shaft grind?
>
>Some addition assembly required, all parts thrown in boot.
>
>I would ask for serious inquires only but who in their right mind would
want this?
>
>--
>Frank Clarici
>Too many Sprites
>http://www.exit109.com/~spritenut
>
>
>
>





<Prev in Thread] Current Thread [Next in Thread>