spridgets
[Top] [All Lists]

Re: Bugeye Hardtop Attachments

Subject: Re: Bugeye Hardtop Attachments
From: Ulix Goettsch <ulix@u.washington.edu>
Date: Thu, 28 Jan 1999 08:27:30 -0800 (PST)
Cc: Scott & Glenda Meyers <autox@earthlink.net>, spridgets@autox.team.net
In-reply-to: <36B08830.25D2541@idt.net>
Reply-to: Ulix Goettsch <ulix@u.washington.edu>
Sender: owner-spridgets@autox.team.net
Well, you are both right.  They go through the brackets for the tonneau
bar, at least on later cars...

UIix


On Thu, 28 Jan 1999 hello39@idt.net wrote:

> Scott,
> Those threaded rods slide thru the conv frame mounts and are drawn
> tight with a wingnut or washer and nut, I think
> Alan
> 
> Scott & Glenda Meyers wrote:
> 
> > I have a 1960 Bugeye with a hardtop. It has two flexible front
> > snaps that attach to the windshield, and two threaded rods
> > running down from the back sides, just in front of the side
> > window opening (right behind the door opening).
> >
> > That's all that cam with it.
> >
> > What am I missing? It seems that these two rods should fit into
> > some bracket that would attach inside the car, and then tighten
> > down with a nut......?
> >
> > Thanks for any info.
> >
> > Scott Meyers
> > 60 Bugeye 1275
> > In does rain in Phoenix a few times each year   ;-)
> 
> 
> 

    Ulix                                       __/__,__      ___/__|\__  
..............................................(_o____o_)....<_O_____O_/...
                                              '67 Sprite     '74 X1/9


<Prev in Thread] Current Thread [Next in Thread>