spridgets
[Top] [All Lists]

Re: Checking bearing specs

To: Lancer7676@aol.com, Metallian6@aol.com, spridgets@autox.team.net
Subject: Re: Checking bearing specs
From: Ronsoave@aol.com
Date: Thu, 8 Apr 1999 21:04:38 EDT
Reply-to: Ronsoave@aol.com
Sender: owner-spridgets@autox.team.net
In a message dated 99-04-08 20:40:36 EDT, Lancer7676@aol.com writes:

> And it still is probably the best way to check 
>  the tolerances as far as I know.

Assemble the bearings in their caps.  Tighten to specified torque.  Use bore 
micrometer to measure ID.  Use outer mic to get diameters of the crank 
journals. Subtract.  It's the best way, if you've got the tools.

<Prev in Thread] Current Thread [Next in Thread>