spridgets
[Top] [All Lists]

Re: Heat

To: Michael Walter <mwalter@luminet.net>, spridgets@autox.team.net
Subject: Re: Heat
From: Jeff Boatright <jboatri@emory.edu>
Date: Tue, 21 Sep 1999 11:33:04 -0400
In-reply-to: <3.0.1.32.19990921100849.006d38e8@POP3.HBCI.com>
Reply-to: Jeff Boatright <jboatri@emory.edu>
Sender: owner-spridgets@autox.team.net
Quitcherbellyakin! Whaddya want, egg in yer beer?

Yes, you have the system correct with the exception that you don't mention
the little vent doors on either side of the transmission tunnel. The way I
use the heater is that I open the water tap in winter and close it in
summer. The fan motor rarely gets used. I think of the vent doors as the
on/off switch for the heater. BTW, this is the first car that my wife and I
have owned that we are happy with in cold weather. She always needs lots of
heat and I don't need much. So, she opens her vent door and is nice and
toasty warm without melting me.

Jeff

At 11:08 AM -0400 9/21/99, Michael Walter wrote:
> Let me be stupid again. I was driving the Midget last night. It was getting
> coolish, so I looked for the heater controls. To my surprise, I find one
> dial and a fan switch. It appears that the dial controls the direction of
> the air flow and the switch controls the fan assist. Got home and looked in
> the owner's manual. If I am reading this thing right... If my SO gets cool
> while we're tooling around, I have to pull over, open the hood, find the
> hot water re-direction switch (to route it through the heater core), shut
> the hood, climb back in, set the air flow direction and fan assist, and
> then drive off warm. When it gets too warm, I reverse the procedure? Seems
> a bit "primitive" to me. Or have I got the system all wrong?
>
> Michael Walter
> mwalter@luminet.net
> http://www.luminet.net/~mwalter/
> ==============================
> People cannot be made to see that
> which they are determined not to see.
> ==============================




Jeffrey H. Boatright, PhD
Senior Editor, Molecular Vision
http://www.molvis.org/molvis
Mailto:jboatri@emory.edu
404-778-4113




<Prev in Thread] Current Thread [Next in Thread>