spridgets
[Top] [All Lists]

Re: Lower Fulcrum pin removal?

To: LColli3554@aol.com, spridgets@autox.team.net
Subject: Re: Lower Fulcrum pin removal?
Date: Fri, 05 May 2000 16:17:08 -0500
Todd,
        Before you start getting frustrated with using the screwdriver, undo the
small nut and bang out the small taper pin that locates the king pin to the
fulcrum pin. You'll find the taper pin inboard and in the middle of the
kingpin bottom, and you'll find that difficult, too. Once that is out you
can commence to getting frustrated taking out the trunion with the
screwdriver. Then you'll use a sawzall.
        Peter C
----
At 03:36 PM 5/5/2000 , LColli3554@aol.com wrote:
>73 midget advice needed on the how to remove the lower fulcrum pin, that 
>holds the king pin in place at the lower end. The hole appears threaded and 
>the pin has a slot in which looks to be for a flat blade screwdriver? Thanks 
>Todd.


<Prev in Thread] Current Thread [Next in Thread>