spridgets
[Top] [All Lists]

Re: master cylinder question

To: mlawrence@datasys.net, spridgets@autox.team.net
Subject: Re: master cylinder question
Date: Fri, 16 Aug 2002 12:47:50 EDT
In a message dated 8/16/02 9:19:38 AM Pacific Daylight Time, 
mlawrence@datasys.net writes:

> How does one go about stopping a leak in the master brake cylinder?  This is 
> a
> new mc for the 1500.  I believe the leak is from underneath the rubber boot 
> or
> whatever it is called where the plunger goesinto the master cylinder to put
> pressure on the fluid as the fluid is slowly going down my brake pedal.  
> Yes,
> despite my "taste test" I recently described, it is definitley brake fluid.
> 

If it is new I would be removing it and taking it back.  When the M/C starts 
leaking around the seal it is time for a rebuild.
John

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/spridgets


<Prev in Thread] Current Thread [Next in Thread>