spridgets
[Top] [All Lists]

A-arm woes

To: "Spridgets" <spridgets@autox.team.net>
Subject: A-arm woes
Date: Fri, 11 Jul 2003 09:24:05 -0400
There was a thread recently about a cracked A-arm.  Here is another story,
sadly about my Meejit!

I developed a bit of a clunk somewhere, pretty sure in the front right.
Checked wheel bearing ok, kingpin ok.  Even put it up on a lift and went all
around.  The car even passed our relatively tough MA safety inspection.
Finally I decided that I would remove the front right shock....bushings?....in
other words grasping at straws...

As soon as I disconnected the shock arm from the kingpin trunnion, I noticed
that I could move the fulcrum pin by rocking it forward.  I could NOT do this
with the shock arm connected though!!  The pin had been banging around in it's
threads and actually worn through the A-arm.  Not a pretty sight.

So lube those pins, boys and girls!!  And check them carefully.  A failure
would ruin one's whole day.

Geoff Branch
'74 Meejit "Yellow Peril"
'72 Innocenti 1300 Mini

///  unsubscribe/change address requests to majordomo@autox.team.net  or try
///  http://www.team.net/mailman/listinfo
///  Archives at http://www.team.net/archive/spridgets


<Prev in Thread] Current Thread [Next in Thread>