Re: Sprite latches

I think 24 gauge steel is about 1/40 of an inch (about 0.025)

Rick & Carolyn wrote:

>Hi Frank,
>
>How thick is 24 gauge metal?  I don't have my charts handy, they are at work.
>
>My BE is lately having the same problem.  The doors won't close.  It looks to 
>me like the moving pin is out too far.  The Post looks like it is aligned with 
>the hole, but i don't have any plates under the striker post.
>
>Thanks
>
>Wrongway Ricky