spridgets
[Top] [All Lists]

Re: [Spridgets] 1275 weber conversion question

To: Nathan Causey <irish_32_@hotmail.com>
Subject: Re: [Spridgets] 1275 weber conversion question
From: "William M. Gilroy" <wmgilroy@gmail.com>
Date: Sun, 02 Nov 2008 22:58:05 -0800
You will need a vent fuel tank cap.  Also make sure the electric pump
you picked supplies the proper PSI.  If the pressure is to high you will
need a regulator.

-g


Nathan Causey wrote:
> I have put a dcoe 45 on my 70 midget- 1275-  for pure spite I have eliminated
> all emissions, and evaporative loss control and simply run a strait line from
> the tank to the new electronic fuel pump to the carbs.  The question  I have
> is will this work.  I have a lot of work to put the car back together but I am
> putting in a new tank from Victoria and the evap loss congrol hole was not on
> the tank also the weber does not have the hose fittings for the evap loss
> control. so simply all of this system is not being installed on the car
>
> any thughts> Support Team.Net http://www.team.net/donate.html> > You are
> subscribed as irish_32_@hotmail.com> > http://www.team.net/archive> >
> http://autox.team.net/mailman/listinfo/spridgets
> _________________________________________________________________
> When your life is on the gotake your life with you.
> http://clk.atdmt.com/MRT/go/115298558/direct/01/
> _______________________________________________
> Support Team.Net  http://www.team.net/donate.html
>
> You are subscribed as wmgilroy@gmail.com
>
> http://www.team.net/archive
>
> http://autox.team.net/mailman/listinfo/spridgets
_______________________________________________
Support Team.Net  http://www.team.net/donate.html


http://www.team.net/archive

http://autox.team.net/mailman/listinfo/spridgets

<Prev in Thread] Current Thread [Next in Thread>