spridgets
[Top] [All Lists]

Re: [Spridgets] Vintage Race Spridgets

To: Kevin Valentine <kevinv1275@gmail.com>
Subject: Re: [Spridgets] Vintage Race Spridgets
From: Larry Macy <lmacy@phillymgclub.com>
Date: Wed, 26 May 2010 07:38:17 -0400
My 78 and my 76 both have/had a cable that does that, it is not a solid bar,
just a really thick stiff cable.

Larry

 Larry B. Macy, Ph.D.
 macy@upenn.edu
 Senior IT Program Director
 Neuropsychiatry Section
 Department of Psychiatry
 University of Pennsylvania
 3400 Spruce St. - 1015 Gates
 Philadelphia, PA 19104

I finally figured out what email is for, it's for communicating with people
you'd rather not talk to."  G. Carlin

Sent via magical iPad!,
,

On May 25, 2010, at 11:38 AM, Kevin Valentine <kevinv1275@gmail.com> wrote:

> On May 25, 2010, at 9:34 AM, fastvee wrote:
>
>> The Bentley manual shows a factory bracket to do this, but I haven't seen
one
>> personally.
>
> John,
>
> I have a few of those if you want one.
>
> Some early 70's Midgets had a cable to keep the engine and tranny in the car
in case of an accident.  Mid 70's cars had a solid bar which bolted to the
bottom of the tunnel and to the bell-housing.
>
> Kevin
> _______________________________________________
>
> Donate: http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/spridgets/lmacy@phillymgclub.com
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>