spridgets
[Top] [All Lists]

Re: [Spridgets] Pertronix

To: Spridgets <spridgets@autox.team.net>
Subject: Re: [Spridgets] Pertronix
From: David Lieb <72spridget@gmail.com>
Date: Sun, 24 Oct 2010 15:44:22 -0500
> The ground wire in the distributor was original, and after 50 years it
> broke, but the Pertonix unit should not have failed because of this.

If you think about it, there are only two wires on the Pertronix unit,
Power and Signal. The only way for it to get ground is via that aged
braid, UNLESS you run a third wire and physically ground it.
Electronics tend to have a low tolerance level for iffy grounds.
Please be sure to use a wire that can take all the flexing generated
by the vacuum advance (unless yours is broken or deleted).
David L
_______________________________________________

Donate: http://www.team.net/donate.html
Suggested annual donation  $12.75
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums

<Prev in Thread] Current Thread [Next in Thread>